This is a robust linear bench power supply. Output is fully adjustable from 0-30VDC. Output is regulated and is available full range at 0-5 Amps of current.
Current is controlled using the potentiometer on the front panel. A small screwdriver is used to limit the current output if current limiting is required. The default setting is the full 5A capacity of the unit. Unless you need to specifically set a current limit, it is not necessary to change the current dial setting. In Constant Voltage mode the Amps drawn will be determined by the Load as long as the current drawn does not exceed the maximum 5A.
If the current limit is reached, the unit will automatically switch to Constant Current mode and the Voltage will be automatically adjusted to allow for the Current limit.
The green led display provides high contrast readouts for Voltage as well as Current.
The unit ships with a set of 4mm banana leads. External outputs are also available underneath the front output cover. Behind the cover are screw-type connection ports, to allow the user to permanently attach output cables with bare wires.
Bench Power Supply Details:
- Input Voltage: 220-240VAC
- Output Voltage (CV): 0-30VDC
- Max Output Voltage: 30V
- Output Current(CC):0-5 Amps
- Ripple : 1mVrms
- Line Regulation (CV): < 0.01%+5mV
- Line Regulation:(CC):
- Load Regulation (CV):
- Display Accuracy Voltage: 100mV+/- 1 digit
- Display Accuracy Current: 10mA+/- 2 digits
- Output Control: Single turn knob
- Cooling: fan
- Design Type: Linear
- This unit is perfect on the workbench, in the laboratory or classroom.
- High contrast readouts for Voltage as well as Current
